There are TIC crusher wear parts case studies which include TIC inserts jaw plates, TIC inserts blow bars, TIC inserts hammer, and TIC inserts cone liners case studies.
Background Our USA customer has an impact crusher to crush construction waste which has steels. he uses manganese blow bars, 6 pieces a set, a set can work around 25 days. On the other hand, to remove each of the six blow bars and flip or replace them involved 4 men at two 12-hour premium…
Background Our Philippines customer has two sets of SBM PEW760 jaw crushers, and he uses those plants to crush very hard stones. However, because of crushed hard stone, the HPT300 jaw crusher wear liners need exchange very frequently. This Philippines customer had tested many customers’ products, but no supplier’s product can work for more than…
Background Our Canada customer sends normal manganese jaw plates to his Nicaragua customer. its span life 7 days for fixed jaw plate,14 days for movable jaw plate. However, Nicaragua customers need more wear parts. Challenges We designed a set of TIC insert jaw plates that featured titanium carbide (TiC)inserts in the high wear areas of…
