Installing jaw plates

Installing jaw plates

There are some things that need to notice when installing jaw plates. 3500-0 Deflector plate (moving jaw) 3300-1 Jaw plate 3100-0 Wear plate 3200-0 Support bar. 1 Lifting cavity,2 Lifting tool. If planning to exchange wear plates (3100-0), cheek plates, deflector plate (3500-0), and/or support bars (3200-0) at the same time, please proceed to the…

Exchanging jaw plates

Exchanging jaw plates

After a long time running, jaw plates need an exchange.  The following wear parts are required: A new fixed jaw plate A new movable jaw plate Never weld external lifting eyes to the jaw plates. Always use the referred lifting cavity on the jaw plate and the lifting tool provided with the jaw crusher.  …

Jaw Crusher Crushing Chamber

Jaw Crusher Crushing Chamber

To ensure optimum performance and cost-effective production it’s important to frequently inspect the following parts and to replace them before they are completely worn out. 3500-0 Deflector plate (moving jaw only) 3400-0 Clamping bar 3300-1 Jaw plate 3100-0 Wear plate 3200-0 Support bar Jaw plates The wear pattern and the adjustment of the jaw plates…

Jaw Crusher Protection Plate

Jaw Crusher Protection Plate

Protection plates are designed for additional protection of the crusher’s frame and pitman. They are recommended when using small settings (always greater than or equal to the minimum recommended setting) and/or when the rock to be crushed is very hard (i.e. very low crushability). Of course, these can be used at any time for added…

Jaw Crusher intermediate plate

Jaw Crusher Intermediate Plate

The intermediate plate is an important jaw crusher wear parts. Fitting an intermediate (backing) plate behind the fixed jaw die reduces the nip angle of the crusher. The intermediate plate reduces the feed opening and the setting range by approximately the same amount as its thickness. However, the intermediate plate does not, under normal circumstances,…

Jaw Plates Tooth Profiles And Uses

Jaw Plates Tooth Profiles And Uses

Different jaw plates tooth profiles suit for different working conditions. If you want to decrease your cost, you must choose the right tooth profiles. Qiming Machinery’s engineers will show you which tooth profiles suit for which conditions.  Standard Tooth Recommended Usage: Suitable for both rock and gravel crushing. Wear life, power requirements and crushing stresses…